Analysis of Turbidity analyzers

Analysis of Turbidity analyzers
Turbidity analyzers are generally optical sensors that are designed for the purposes of analysis of suspended solids, turbidity and importantly wastewater. Turbidity analyzers are normally divided into dual optical configuration segments. The first one has an optics that are mounted on the sides and the other with optics that are mounted axially on the front side. Additionally, this kind of devices are generally designed in such a way that the reflective sides in the emitted range of light yields artificially high readings than expected. The optics that are mounted on the sides are ideally used in minimizing interferences from surfaces located below the sensor while the configuration optics mounted axially in front are used in minimizing interferences from surfaces just around the available sensor.

Turbidity measurement
This type of measurements mainly used in the application of wastewater and drinking water. There are different measurement solutions that are offered in as much this subject is concerned. The two major measurement solutions involved include: the open channel measurement and the low-range measurement system. Examples of the measurement solutions are OPTISYS TUR 1050 and OPTISENS TUR 2000. When it comes to the fulfillment of the necessary requirements and regulations, OPTISYS TUR 1050 is actually the best in that case.

Suspended solid measurements
This is actually a key measurement aspect that involves the measurement of some specific industrial processes, water and wastewater. The technique is other words called Total Suspended Solids (TSS). The monitoring of TSS is usually done through grabbing of samples periodically so that gravimetric can be determined in the lab. Absorption sensors can also be used in performing quantitative online TSS. TSS sensor such as OPTISENS TSS 7000 and OPTISENS TSS 3000 are very significant when it comes to this since they help in providing instant results for controlling processes and importantly reduce the time consumed during the lab analysis.

TSS turbidity systems and sensors for Turbidity analyzers
They are normally of two types and are usually very important in as much as suspended solid measurements are concerned.

OPTISYS TUR 1050
This is actually a system for measuring turbidity. It’s has a cost-effective calibration cuvette and a cleaning system that is ultrasonic and automatic.

OPTSENS TUR 2000
A turbidity measurement stray light sensor that performs automatic cleaning and significantly has NIR-LED which is important for log-term stability.
Optisens turbidity system and sensor for Turbidity analyzers
Also divided into two types: Optisens TSS 3000/ Optisens TSS 7000 and TS 150, TS 2050, TS 3050, TS 4050.

Leave Comment

Your email address will not be published. Required fields are marked *